Gleason Torsen Locker
Thread Starter
|
Post Fiend
Joined: Jul 2003
Posts: 11,945
Likes: 3
From: Spokane, WA
Gleason Torsen Locker
Posting this for Mustange70 as his computer is screwball and he can't get it to post new threads for some reason. And to pad my post count of course. 
Originally Posted by mustange70
Well i've got a chance to get a locker/ls diff for my new dana 60 for real cheap and i would like to find a couple things out about this gleason torsen locker, i know its what they use in the hummer's and such with decent succeess. Anyway what i would like to know is how strong this diff really is, like will it withstand my 35x16 boggers a mildly built 400/460 (with up to 400hp)? And secondly does anyone know where i can verify what gear ratio its for, or what measurements could tell me if its for a 4.10 and under carrier?
Post Fiend
Joined: Nov 2001
Posts: 5,871
Likes: 0
From: Coutts Canada
Thanks again ivan, sucks can't even post smiles (other than what i remember from using the keyboard).
Anyway, i found out that its for a 4.10 and down carier, and that they are of the same design as the detroit true trac.
Anyone have any experience (or even see one) running one of these, cause for the 50-75 bucks i should be able to pick it up for, its hard to pass up.
Anyway, i found out that its for a 4.10 and down carier, and that they are of the same design as the detroit true trac.
Anyone have any experience (or even see one) running one of these, cause for the 50-75 bucks i should be able to pick it up for, its hard to pass up.
Thread
Thread Starter
Forum
Replies
Last Post
Jon Gleason
1999 - 2016 Super Duty
5
Jan 31, 2017 10:58 AM
