New carb
Thread Starter
|
Freshman User
Joined: Apr 2004
Posts: 30
Likes: 0
New carb
Hello all i just purchased a carb and im wondering how much power it will give me? It is a holley 350 cfm or something like that. and also any tips on what plate to put between the manifold and carb itself? or where i can get 1? the engine is a 352 and no modifications.
Elder User
Joined: Aug 2003
Posts: 693
Likes: 0
From: Tuttle, Oklahoma
go with a 4 barrel intake manifold, and use a 1/2" spacer for a heat insulator.
the adapters are fine if all you have is a 4 barrel, and not a matching mannifold. but you might as well just keep the 2 barrel on it if you are going to do that.
the adapters are fine if all you have is a 4 barrel, and not a matching mannifold. but you might as well just keep the 2 barrel on it if you are going to do that.
Thread Starter
|
Freshman User
Joined: Apr 2004
Posts: 30
Likes: 0
carb and intake
it is a 2 brl i just posted for a wanted ad i need a intake now that is lighter then the cast iron one i have. i need to get a spacer for it too i have one that might be ceramic or something like that maby even a hard plastic i dont know. but it needs replaced i know that it is not broke either just wanting a new one . do you know where i can get one from?
