rear hatch
Elder User
Joined: Dec 2000
Posts: 660
Likes: 0
It is mostly held on with push type connectors. IIRC, there is one screw that holds the strap on that needs to be removed. Otherwise you have to pull the panel off. You can use a putty knife or buy one of the tools made specifically for interior panel removal. Most auto parts stores sell the tool. If you destroy any of the push connectors they are available from the dealer and most auto parts stores. It is not too difficult.
Mason
Mason
Elder User
Joined: May 2004
Posts: 508
Likes: 0
From: Webster, NY
On my 97 there are 5 (I think) press fit push type connectors at the very top of the plastic that need to come out. Then you also need to remove the two screws that hold in the strap as well as one screw that is under the cover for the rear hatch lock lever.
After removing all that it basically slides upward and pops out.
After removing all that it basically slides upward and pops out.
Thread
Thread Starter
Forum
Replies
Last Post
ExplorerSp0084
Explorer, Sport Trac, Mountaineer & Aviator
1
Jan 22, 2004 07:51 AM
