Yesterday, while in traffic, a '01 F-350 ROARED by me with the loudest turbo whine I have ever heard. I mean, this was louder than a big rig, and responded perfectly to the engine's RPM's. I could even hear it at idle! I was so taken back by this that I followed the guy to where he was going and asked him what kind of setup he was running. I expected him to tell me all about some super ball bearing turbo with a aftermarket intake and chip, but much to my surprise he said he only had a "Hog" exhaust system with 4" pipe from the turbo back and an 8 inch tip! He said the 8 inch tip was what was making all the whine so loud. He claimed that everything else was bone stock and was even still running his cat. Anybody have one of these exhausts?

Thanks!

 

I have the same (Hog) setup on my truck as well, minus the CAT. I'm told its very loud as well.

Very happy with it, no complaints.

 

EIGHT inch tip?!?!?! Man!!

 

8"??? That's a CHIMNEY - not an exhaust tip!!!

 

8" tip?


is anyone else going to call bs?

 

a chimney, ha ha thats a good one!

 

Yeah I tell everyone mine is nine.... nevermind

 

Hey....I saw it with my own eyes, other wise I wouldn't believe it either! I didn't get out and measure it with a tape, but this thing was big enough to put a soccer ball in!

I'm kind of bummed out now though. I checked on Hogs website and they don't make a kit for my year truck ('97), just '99's on up.

 

I have seen a 6" tip with a Mountain Dew can sitting upright in there and that was impressive but an 8" is outragous to even think about.

 

quote: "He claimed that everything else was bone stock and was even still running his cat".

Does an 01' even have a cat? I don't think so.

 

I wouldn't swear on the year, being an "older body style" lover, all the newer ones look the same to me! My partner has an '01 and this looked the same as his, but I know it was fairly new, in the 2000's.

 

I thought if it was a stick shift then they still had the cat's on them but I could be wrong.

refuse2

 

This was definetly a 6 speed manual, I could hear that turbo go up and down through all 6 gears.

 

Ok, teach me how to do that quote thing and I will believe you. Where was the exhaust exiting the truck?

 

To do the
"quote" thing, just hit the "quote" button that is right below the message that you want to quote. Then, a message window will pop up with the persons previous message written in it with brackets and the word QUOTE at each end. At this point, you can select text to highlight or delete, or just leave the message in it's entire form. Put your cursor at the end of the quoted message and hit the enter key to go to a new line, then start typing! Now do you believe me?

The pipe was exiting on a 45 degree angle right where the stock pipe is, on the passenger side behind the wheel.

Now it's your turn to try it!