351W Head Torque Sequence
Thread Starter
|
Junior User
Joined: Jul 2003
Posts: 50
Likes: 0
From: Curently live in FL.
351W Head Torque Sequence
I have been searching online for the Head Torque sequence for a 351W. I was not having much luck. I did find the intake pattern. I am just too cheap to buy a book....when I know it is available online. If anybody knows where I can get this info, or even a pictoral diagram would be exrtremely helpfull 
. thanks.
. thanks.
Postmaster
Joined: Jun 2001
Posts: 4,496
Likes: 0
Bolt tightening sequence goes like this:
Top row (left to right): 9 5 1 3 7
Bottom row (left to right): 10 6 2 4 8
If its a stock head:
First time around torque them down to 95 to 105 ftlb
Second pass, torque them down to 105 to 112 ftlb
Top row (left to right): 9 5 1 3 7
Bottom row (left to right): 10 6 2 4 8
If its a stock head:
First time around torque them down to 95 to 105 ftlb
Second pass, torque them down to 105 to 112 ftlb
Postmaster
Joined: Jun 2001
Posts: 4,496
Likes: 0
The "top row" I was referring too runs left to right across the head, between the rocker studs/bosses and the springs.
The "bottom row" I was referring too runs left to right across the bottom of the head, just below the exhaust ports.
good luck
The "bottom row" I was referring too runs left to right across the bottom of the head, just below the exhaust ports.
good luck
Thread
Thread Starter
Forum
Replies
Last Post
moneypitf150351w
1987 - 1996 F150 & Larger F-Series Trucks
4
Aug 11, 2012 11:04 PM
moneypitf150351w
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Aug 11, 2012 06:12 PM
rsdjcarter
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
5
Jul 15, 2009 07:20 PM
