When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have owned two fords that share a common problem. The right side of the driver's seat loses it's support and sags. In other words, my right shoulder is in the back seat, while my left is in the front. Any suggestions on how to fix this problem other that purchasing another seat?
i had that problem once and the only thing i could figure out to do was cut the seam open fix the broken beam and then sew the cover back together and then get new seat covers from wally mart
I had that problem on an 87 Bronco2.Those seats had a zipper on the bottom that could be opened,took the outer cover off an rewelded the
internal parts back together and put cover back on,better than when new!
good luck
Rich
Ford Trucks Built Tough!
not with rocks
Watch out Mr Mayor of Truckville
I had an 83 T Bird with buckests, it broke on the right hand side of thr seat, same thing in an 85 Bronco II, and in an 88 F150 XLT SCrew, hope my 04 is better