360 hp?
Thread Starter
|
Junior User
Joined: Feb 2004
Posts: 58
Likes: 0
360 hp?
I am going to start a build on a 400 and I am wanting to shoot for 360ish horsepower and about 475lb-ft. Is that gonna be too hard? Not too sharp on the engine building scene hehe. I do not want to have a supercharger or juice, I just want moter and run off 91 octane. I do not have any emission controls. Anyone have any suggestions on how I can Acheive this goal?
thanks all very much.
thanks all very much.
Elder User
Joined: Jan 2004
Posts: 767
Likes: 1
From: Franklin, GA
http://www.geocities.com/styleline58/400.html
Just one example of what you can find with a Google search. Also, don't neglect searching this site for M-block 400 rebuild info.
http://www.projectbronco.com/Technic...e_build_up.htm
http://home.earthlink.net/~bubbaf250/
Just one example of what you can find with a Google search. Also, don't neglect searching this site for M-block 400 rebuild info.
http://www.projectbronco.com/Technic...e_build_up.htm
http://home.earthlink.net/~bubbaf250/
Senior User
Joined: Nov 2004
Posts: 285
Likes: 0
that should be no problem, i finished my rebuilt 2 years ago, got 10:1 compression and put about 350hp, with a litle more work and better heads i can do about 600hp. but it depends on how much you want to spend while doing it.
Thread
Thread Starter
Forum
Replies
Last Post
timothy47129
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
8
Nov 14, 2006 04:29 PM
parkerusmc
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
25
Oct 24, 2005 01:24 PM
rustygreen76ford
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
9
May 7, 2003 09:27 PM
