Dyno Results
Thread Starter
|
Freshman User
Joined: Jul 2004
Posts: 28
Likes: 0
Dyno Results
I attended a dodge dyno event over the week end and wanted to share some results. I ran My 04 f 350 cc 4x4 drw with predator, mac intake and 4 in cat back. I ran 369 hp and 655lb ft of torque. The truck only has 3900 miles on it. A guy with a d max with edge juice with attitude ran very close 370 hp and 678 tq. Exept for one HEAVILY modified 7.3 psd all of the 7.3 psd were not even close. Most of the Dodges with similiar mods were about100 hp less than mine and their torque was close to mine. I know there are guys here at F T E getting a little better numbers with like mods but I was happy with The numbers I got. While talking to people there They were talking about gaining hp with spraying the turbo and intake ( not meth injection) to keep the air cooler entering the motor. I know this sounds funny but has any one tried or heard of this. I am not sure spraying the hot turbo with water is good for the metal. Looking forward to any comments
Thread
Thread Starter
Forum
Replies
Last Post
Spool&Go
1999 - 2003 7.3L Power Stroke Diesel
36
Sep 15, 2010 09:06 AM
FORDF250HDXLT
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
33
May 24, 2010 10:53 AM
