trans modulator hookup
Thread Starter
|
Senior User
Joined: Aug 2002
Posts: 184
Likes: 0
From: Chattanooga US
trans modulator hookup
I'm finally nearing the end of my '69 ranger restoration, I need to know how to hook up the modulator valve on the c-6. The mod that's on the trans has two vacuum points, one in the middle of the valve and another on the side of the valve. could someone tell me where they need to terminate?
Thanks for the help thus far.
Greg
Thanks for the help thus far.
Greg
Post Fiend
Joined: Sep 2004
Posts: 5,231
Likes: 1
From: Near Fresno, California
You sure you have a C6? I just went through a C6 manual written by the Automatic Transmission Service Group and all they show is one vacuum line to the modulator. There is some special provisions for when connected to a diesel engine and the picture of that modulator is not clear, but even it looks to have only one vacuum line.
Wish I could be more help, perhaps someone else has two vacuum lines to their modulator.
Wish I could be more help, perhaps someone else has two vacuum lines to their modulator.
Thread
Thread Starter
Forum
Replies
Last Post
