I have not heard of many (any?) LL cases on the 6.0 actually going to court, I guess. Seems most or all are either settled in DSB, through the dealer/rep/ford or settled out of court. Someone here even suggested you'll never see one go to court because the plantiff's lawyer could get info, that ford does not want to have become public, on discovery that would then become public record.

 

This good be very a very plausible statement

 

still noone has been able to run my vin number? we go to arbitration on the 21st of october.

 

I'd like to know what kind of problems or questions we'll have to deal with on the arbitration. The vin number history is one of our pieces of evidence i'd like to have, or at least know in advance.

 

I know I DID have it; god knows where it went...I have had lots of VIN requests in the past month, I apologize.

Just drop it in a PM and I will run it for your right now.

 

Just found it earlier in the thread and ran it...

Here is what it is showing on record:
08/24/2004

DEALER: Sunrise Ford Company
WARRANTY CLAIM NUMBER: 256242 ODOMETER: 006818M
PART NUMBER PART DESCRIPTION QUANTITY
LABOR OP
CONDITION CODE
CONDITION DESC
12A650 PROCESSOR ASSY 000 6005F 04 SOFTWARE REVISION/FL
000 6005F1
000 6005F1X1
000 6005F2
000 6005F6
000 6005F8
000 6005F9
000 6005F11
000 6005F12
000 6005F13
000 6005F14
000 12650D84
UNABLE TO VERIFY CUSTOMER CONCERN ROAD TEST, DIESEL DIAG 1-15, ALL PASS, RE PROGRAM PCM TO LATEST 4U7A-BFB. TEST DRIVE COULD NOT DUPLICATE CUSTOMER

--------------------------------------------------------------------------------

07/12/2004

DEALER: Sunrise Ford Company
WARRANTY CLAIM NUMBER: 253241 ODOMETER: 006048M
PART NUMBER PART DESCRIPTION QUANTITY
LABOR OP
CONDITION CODE
CONDITION DESC
12A650 PROCESSOR ASSY 000 6005F 42 DOES NOT OPERATE PRO
000 6005F1
000 6005F2
000 6005F6
000 6005F8
000 6005F9
000 6005F11
000 6005F12
000 6005F13
000 6005F14
000 12650D84
RE FLASH PCM KOE,KOER, DISEL DIAGNOSIS, 1-15 ,PCM TCM AND FICM, TO LATES TE ST CALIBRATION, ROAD TESTED OK PASS,,CUST IS COMPLAINED

--------------------------------------------------------------------------------

05/24/2004

DEALER: Sunrise Ford Company
WARRANTY CLAIM NUMBER: 249905 ODOMETER: 004947M
PART NUMBER PART DESCRIPTION QUANTITY
LABOR OP
CONDITION CODE
CONDITION DESC
3C3Z 9J460AA SENSOR ASY EGR PR VL 001 6005F 42 DOES NOT OPERATE PRO
000 6005F1
000 6005F1X1
000 6005F2
000 6005F6
000 6005F8
000 6005F9
000 6005F11
000 6005F12
000 6005F13
000 6005F14
000 6005F18
000 12650D10
OERATING NORMALLY AT THIS EBP OUT OF RANGE CHECK FOR SURGE AT IDLE OR AT CRU ISE UNABLE TO VERIFY.DIESEL DIAG 1-15 KOEO PASS CONTINUOUS PASS KOER PASS IN JECTOR TEST

--------------------------------------------------------------------------------

03/16/2004

DEALER: Sunrise Ford Company
WARRANTY CLAIM NUMBER: 244745 ODOMETER: 003102M
PART NUMBER PART DESCRIPTION QUANTITY
LABOR OP
CONDITION CODE
CONDITION DESC
12A650 PROCESSOR ASSY 000 6005F 42 DOES NOT OPERATE PRO
000 6005F1
000 6005F1X1
000 6005F2
000 6005F6
000 6005F8
000 6005F9
000 6005F11
000 6005F12
000 6005F13
000 6005F14
000 12650D84
PCM UPDATE CK FOR RUN ROUGH DIESEL DIAG 1-15,KOEO PASS,CONT PASS,AL OK REFL ASH PCM TO LATEST UPDATE SHOULD ADRESS ISSUES NOTED#140200000000000001643500 0000000000016435

 

Thanks, now i just need to figure out how to translate all that LOL. One of em mentions egr out of range- is that part of a code in the truck or what the mechanic was trying to find wrong with it? Also why do they all start off with processor assy does not operate properly? Everytime we've brought it in they said nothing was wrong with the truck. So according to this they haven't done any wire harness chaffing repairs?