Intake ID decoding
Thread Starter
|
Tuned
Joined: Mar 2004
Posts: 265
Likes: 2
From: Georgetown, De
Intake ID decoding
Can someone give me some info on this intake ID?
D5TE-9425-MB
How good is it compared to other cast iron intakes and how well will a 352 perform with it when it has headers, mandrel bend 2.25 dual exhaust, 600cfm Edelbrock and how would it do in the quarter with a quick shifting NP-435, 4.10s, 2x4, 9" wide tires, 4,200 lb truck?
Erik
D5TE-9425-MB
How good is it compared to other cast iron intakes and how well will a 352 perform with it when it has headers, mandrel bend 2.25 dual exhaust, 600cfm Edelbrock and how would it do in the quarter with a quick shifting NP-435, 4.10s, 2x4, 9" wide tires, 4,200 lb truck?
Erik
Post Fiend
Joined: Feb 2000
Posts: 5,130
Likes: 8
From: Brea CA
That's this intake, like the color? 
It's nothing special, just as good as any other cast iron intake. Should work nice on your 352. Does yours have the EGR hole like this one? If so you have to seal it off somehow.
How would it do in the quarter? Well, with a stock cam and everything else you've got, probably a 18 sec. truck.
Can you quick shift a NP435?
It's nothing special, just as good as any other cast iron intake. Should work nice on your 352. Does yours have the EGR hole like this one? If so you have to seal it off somehow.
How would it do in the quarter? Well, with a stock cam and everything else you've got, probably a 18 sec. truck.
Can you quick shift a NP435?
Thread
Thread Starter
Forum
Replies
Last Post
Ranger92
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
10
May 17, 2011 07:30 PM
fmc400
Ford Inline Six, 200, 250, 4.9L / 300
2
Apr 27, 2008 04:05 AM
icuhatn99
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
1
Feb 5, 2006 10:35 PM
