Fordpickup460 hit it right on. Ford never called those trucks highboys.
highboy emblems
Thread Starter
|
Postmaster
Joined: Apr 2003
Posts: 2,703
Likes: 4
From: Harrisburg, NE
highboy emblems
anybody know of any emblems that say highboy on them? if not ithink that i could use a properly sized 1/4 thick chunk of aluminum and carefully using the dremel, carve out highboy, and paint the inside of the letters black, then giving it a good polish. although i have no clue how i would attach them to the body below the f250 emblems (hopefully the fenders i get actually have the f250 emblems)
Last edited by muscletruck7379; Jun 12, 2004 at 12:12 AM.
Thread Starter
|
Postmaster
Joined: Apr 2003
Posts: 2,703
Likes: 4
From: Harrisburg, NE
i was kinda hopin that ford just caught onto the name, or somebody made some for something else...
about what would the cnc milling cost? i really dont want to spend a ton, or have to go to jr motorsports or something. i know that they have one that they use to make jr dragster parts, but the are also quite pricey
BTW ivan: i have no f250 emblems on my highboy
, and while i hope to be able to find a good set in my favorite junkyard (speaking of which, how do they come off?) i just think that having custom "highboy" emblems would help make it one-of-a-kind without becoming too gaudy
about what would the cnc milling cost? i really dont want to spend a ton, or have to go to jr motorsports or something. i know that they have one that they use to make jr dragster parts, but the are also quite pricey
BTW ivan: i have no f250 emblems on my highboy
, and while i hope to be able to find a good set in my favorite junkyard (speaking of which, how do they come off?) i just think that having custom "highboy" emblems would help make it one-of-a-kind without becoming too gaudy
Last edited by muscletruck7379; Jun 13, 2004 at 10:37 PM.
Post Fiend
Joined: Jul 2003
Posts: 11,945
Likes: 3
From: Spokane, WA
The emblem on my truck (78) sits up higher than the older models. I believe on the older trucks it will be on the fender itself whereas mine is above the fender. I have removed them using a flat screwdriver to work them loose.
I would think CNC machining of something like that would get to be quite spendy. If you really want one you may be better to see about getting an engraver to make something for you. Check trophy shops. If they can't do it the way you want they'll know who to suggest in your area.
I would think CNC machining of something like that would get to be quite spendy. If you really want one you may be better to see about getting an engraver to make something for you. Check trophy shops. If they can't do it the way you want they'll know who to suggest in your area.
Senior User
Joined: Apr 2004
Posts: 422
Likes: 0
I know it would be time consuming... but what about making a mold and dumping lead or plastic into it, then painting the result?
Although, if you have a steady hand and a lot of patience, you could do it with a dremel (I've seen harder things done). It would just be very very difficult to get both of them the same...
Although, if you have a steady hand and a lot of patience, you could do it with a dremel (I've seen harder things done). It would just be very very difficult to get both of them the same...
Trending Topics
Thread Starter
|
Postmaster
Joined: Apr 2003
Posts: 2,703
Likes: 4
From: Harrisburg, NE
unfortuanatly, i really dont have a steady hand (which is why you seldom see pics from me) but i have been racking my brain of how i could set something up to move my dremel back and forth. i was thinking about a miniture drill press we have that is made to stick a handheld drill into, rigging it to hold my dremel at a certain hight and running the aluminum through it by hand (i would have to get stencils to mark where i wanted to cut). and i wouldn't have to get both perfectly the same, due to each being on opposite sides of the truck. the mold would be the best way to get them to look the best, but i also have nothing to do the molds with, I also lack the knowlege.
Ivan: so they just work out like those little door panel clips?
Ivan: so they just work out like those little door panel clips?
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread
Thread Starter
Forum
Replies
Last Post
JTChandler
1973 - 1979 F-100 & Larger F-Series Trucks
8
Oct 12, 2015 09:10 AM
66F100Again
1961 - 1966 F-100 & Larger F-Series Trucks
6
Sep 6, 2015 08:28 AM
dessoffy1
New Member Introductions
1
Jun 7, 2006 03:51 PM
