When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 1978 f250 4x4 with a 300 6 clyinder and 4 speed manual transmission
with creeper gear. I have a 351M to replace the 300 with but need the bellhousing, ect. Can anyone tell me what bellhousing I need + anything else I might need and where I might find these parts. The 351 is out of a truck with an automatic thans.
you will need to find a truck with a standard and get all the parts from thebell housing out to the pedal actuator rod. dont forget the equilizer pivot, it bolts to the bellhousing.
The 300 is a good engine. If I was moving up I would want a 400. The best way to do engine swaps is with a donor truck. Finding all of the parts and pieces individually is hard.
I have a bell housing for you!! I have two Id like to sell both will hook up to the NP435 4 speed one is for a 351M and one is for an FE motor. E-mail me if you are interested. stirlingford@excite.com
EDITED by FTE:
uuuu, i guess I cant post my e-mail. Oh well, just post if your interestd in it.