hardwiring wipers
Thread Starter
|
Senior User
Joined: Jul 2001
Posts: 352
Likes: 0
From: Palatka, FL
hardwiring wipers
I still cant get my wipers to work after I swapped cabs recently (see post a few pages back about 93 cab onto 95 truck). I Would like to know how to wire the wiper motor to a toggle switch inside the truck with just one position, on and off. What wires do I need to splice into and also should the motor be case grounded and be grounded through one of more of the wires?
Moderator
Joined: Jan 2001
Posts: 56,977
Likes: 2,734
From: Virginia
If you have the same wire colors, here is a post I made a few days ago.
https://www.ford-trucks.com/forums/s...d.php?t=245743
You could wire it with a simple on-off switch, but you would have to cut them off just right so they would be low on the windshield(park position).
Now that I think about it, if you had a single poll, double throw on-off switch, you could have low speed and park position. Let me do a little figuring, and maybe I can make a little diagram.
https://www.ford-trucks.com/forums/s...d.php?t=245743
You could wire it with a simple on-off switch, but you would have to cut them off just right so they would be low on the windshield(park position).
Now that I think about it, if you had a single poll, double throw on-off switch, you could have low speed and park position. Let me do a little figuring, and maybe I can make a little diagram.
Thread
Thread Starter
Forum
Replies
Last Post
