No start problem
Thread Starter
|
New User
Joined: May 2004
Posts: 11
Likes: 0
No start problem
Hi, I'm a 1st time user & I gotta problem...go figure. I found a fuel leak on the valley under the fuel filter of my '96 F350. I figured it was an old hose or the "O" rings on the water separator. So, I trotted down to my local Ford dealer to buy the hoses & scrounged for the "O" rings. Long story short, After I assembled everything back together the truck wont start. It cranks fine, The tach rises just a bit during the crank and all fuses appear Ok....where do I go from here? After viewing a bunch of the PSD threads seveal have talked about the CMP sensor. Should I start with that or call for the tow truck?...Send Help!
Last edited by hpatino; May 29, 2004 at 07:33 PM. Reason: spelling
