another boost gauge ?
another boost gauge ?
Senior User
Joined: Nov 2001
Posts: 316
Likes: 0
I didn't get any lines or fittings with mine. I had to make mine up at Cheapo Depot. The map line is 1/4 ID and my line from the gauge is 1/4 OD. I had to make up a 1/4 T with the third leg being 1/8 all from barbed brass with stainless clamps. The map line runs from the base of the base of the "Y" intake to near the passenger fender where it plugs into the bottom of the MAP sensor.
Postmaster
Joined: Jan 2004
Posts: 4,758
Likes: 7
From: colorado
Originally Posted by dieselstroke
was i suppossed to get a t-fitting with my boost gauge? also does it go
into the red vaccum line to the turbo?
into the red vaccum line to the turbo?
Thread Starter
|
Senior User
Joined: Mar 2004
Posts: 336
Likes: 0
From: whitney
sounds fairly easy all's i need besides what i didnt get in the kit is a t-fitting
right? and the two bottom tubings will be 1/4'' and the third one that goes
at a 90 degree angle from them need's to be 1/8'' eh?
right? and the two bottom tubings will be 1/4'' and the third one that goes
at a 90 degree angle from them need's to be 1/8'' eh?
Thread
Thread Starter
Forum
Replies
Last Post
chetspencer
6.0L Power Stroke Diesel
6
Feb 28, 2015 08:47 PM
