Reburn needed w/Transgo Shift kit?
Thread Starter
|
New User
Joined: Apr 2004
Posts: 2
Likes: 0
Reburn needed w/Transgo Shift kit?
I installed a Diablo Sport chip in my 97F250LD 5.4L w/E40D tranny. I have loved the chip; slight lag around 2700RPM, but opening up the airbox took that away.
I'm installing a Transgo shift kit tomorrow and plan on using the middle setting. Should I have the chip reburned? If so, how do I get the details?
TIA,
Scott
I'm installing a Transgo shift kit tomorrow and plan on using the middle setting. Should I have the chip reburned? If so, how do I get the details?
TIA,
Scott
Post Fiend
Joined: Jan 1997
Posts: 23,165
Likes: 18
From: Enjoying the real world.
The chip and kit together may result in a very harse shift. If it does, then the chip will need to be reburned to remove the line pressure increase.
www.motorhaven.com - Click on the Diablo chips and then see the reburn fee lower down the list.
www.motorhaven.com - Click on the Diablo chips and then see the reburn fee lower down the list.
Thread Starter
|
New User
Joined: Apr 2004
Posts: 2
Likes: 0
Turns out that the shift kit is a very nice compliment to the Diablo chip.
I used the "mid-range" setting for the shift kit, and am very pleased with the results. Shifts are solid, quick, and firm; not too harsh.
I used the "mid-range" setting for the shift kit, and am very pleased with the results. Shifts are solid, quick, and firm; not too harsh.
Thread
Thread Starter
Forum
Replies
Last Post
smash fascism
1994.5 - 1997 7.3L Power Stroke Diesel
9
Aug 19, 2012 08:22 AM
Lago_F150
Clutch, Transmission, Differential, Axle & Transfer Case
4
Jul 25, 2003 11:42 PM
