Welding Classes
Thread Starter
|
New User
Joined: Mar 2004
Posts: 5
Likes: 0
From: the land of beautiful women and hot trucks
Welding Classes
I would like to learn to weld and it seems to be a dieing art in SoCal so if anyone has ideas on a welding class or somewhere i can learn to weld, in a quality maner, i am open to anything. I am located in Orange County so it needs to be local.
Post Fiend
Joined: Apr 2002
Posts: 7,157
Likes: 1
From: Central Kali
It would be great to take a class if you could. I never did. I started checking out books on welding. I bought a typical ac arc welder and started to practice. I then soon realized that cutting metal with a hacksaw was no fun so I bought an oxy/act torch set and tanks.
Later on I bought a mig welder, go 220 volt if you get one. I then converted my arc welder into a tig machine. I bought a bandsaw or two along the way. I have a spot welder project I need to finish. I was doing some welding today. I wouldn't be without it. You can do alot of fun stuff.
Here is a good welding site for alot of info: http://www.weldingweb.com/:)
Later on I bought a mig welder, go 220 volt if you get one. I then converted my arc welder into a tig machine. I bought a bandsaw or two along the way. I have a spot welder project I need to finish. I was doing some welding today. I wouldn't be without it. You can do alot of fun stuff.
Here is a good welding site for alot of info: http://www.weldingweb.com/:)
Thread
Thread Starter
Forum
Replies
Last Post
