Frame up restoration?
Thread Starter
|
New User
Joined: May 2002
Posts: 20
Likes: 0
From: Kansas city USA
I have the garage space, since I had a garage built just to house my pickup. I have time, small amount of budgeted money and most of the tools, however I have never attempted such a project before and don't want to make any major mistakes. However I know I will learn as I go, hopefully without too many screw ups.
Thanks guy for the response!
Thanks guy for the response!
Lead Driver
Joined: Nov 2002
Posts: 9,692
Likes: 1,259
From: Jefferson City, MO
Take lots of notes. Write everything down. If you have a digital camera, take lots and lots of pictures. If you have a regular camera still take a bunch.
Make little diagrams of everything. Buy a shop manual (this is a must)
Whenever I take bolts off that will be off for a while, I put them in a ziploc bag and label the bag as to what they are.
Search the forums for answers to your questions. If you don't find them ask. People here are very knowledgable (I'm not one of those) and helpful.
If you think you will remember where that part went, you won't.
Take your time and have fun.
Make little diagrams of everything. Buy a shop manual (this is a must)
Whenever I take bolts off that will be off for a while, I put them in a ziploc bag and label the bag as to what they are.
Search the forums for answers to your questions. If you don't find them ask. People here are very knowledgable (I'm not one of those) and helpful.
If you think you will remember where that part went, you won't.
Take your time and have fun.
Thread
Thread Starter
Forum
Replies
Last Post
cutlass
1999 - 2003 7.3L Power Stroke Diesel
4
May 26, 2014 09:10 PM
