clearing computer codes
Thread Starter
|
Senior User
Joined: Oct 2002
Posts: 174
Likes: 0
From: Venice, FL
clearing computer codes
I have just one code (33) on my 92 Ford. I have been trying to clear a code after a repair with no success. I try to clear it with engine off and procedure with my $30 code reader. (Wait until code transmits and switch from test to hold)
I have also tried by taking battery power away for 15 min to clear continous codes. Any surefire way of clearing it other than 40-80 cycles?
I have also tried by taking battery power away for 15 min to clear continous codes. Any surefire way of clearing it other than 40-80 cycles?
Posting Guru
Joined: Jul 2003
Posts: 1,280
Likes: 0
From: alaska
not reliably , the way shops do it is to sit in the car and turn the key the correct no. of times , its my understanding that the car doesnt have to start , just be powered up thru the ignition,there are others here with more expereince that may know another way, bob
Thread
Thread Starter
Forum
Replies
Last Post
weberr7
6.0L Power Stroke Diesel
10
Jul 2, 2012 03:22 AM
