Frame movement?
Thread Starter
|
Postmaster
Joined: Dec 2003
Posts: 2,659
Likes: 2
From: S/C Texas
Frame movement?
Yesterday I took the truck out in the pasture, as I crossed a ditch(diagonaly), I heard a very loud fast banging. When I crossed the ditch it stopped. So I backed up, did it again. So with it bangin, I found the fan was nipping the bottom of the shroud. Nope, the bumper was not in contact with the ground.
Any ideas what might be allowing my fan to make contact with the shroud? A little worrisome.
Thanks
Any ideas what might be allowing my fan to make contact with the shroud? A little worrisome.
Thanks
Post Fiend
Joined: Jun 2002
Posts: 13,873
Likes: 3
From: Atlanta GA
Your radiator (depending on the set up) rests inside rubber strips at the bottom that can wear out before body mounts and allow enough backwards and forward motion to allow the rad/shroud to tilt towards the fan.
Thread
Thread Starter
Forum
Replies
Last Post
351Cleveland C4
1967 - 1972 F-100 & Larger F-Series Trucks
13
Jan 24, 2017 02:51 PM
Kelley11
1967 - 1972 F-100 & Larger F-Series Trucks
11
May 22, 2015 01:54 PM
