Drl
Moderator
Joined: Jan 2001
Posts: 56,984
Likes: 2,738
From: Virginia
Here's a diagram that has the factory DRL in it.
although I think there may be more to it than that diagram shows. Where do the drl's get their power from?
I am thinking why could you not install a foglamp relay to feed the lowbeams anytime the ignition switch is on? You could power the relay from an ignition source, and the relay could tie the red/yellow feeding the switch and the red/black feeding the lowbeams together, making them come on all the time.
although I think there may be more to it than that diagram shows. Where do the drl's get their power from?
I am thinking why could you not install a foglamp relay to feed the lowbeams anytime the ignition switch is on? You could power the relay from an ignition source, and the relay could tie the red/yellow feeding the switch and the red/black feeding the lowbeams together, making them come on all the time.
Last edited by Franklin2; Dec 27, 2003 at 04:50 PM.
Moderator
Joined: Jan 2001
Posts: 56,984
Likes: 2,738
From: Virginia
I was wrong about the color wire that would feed the homemade relay. It would be the brown wire feeding the headlamp switch power.
Do you guys think this would work below?
I see one flaw already. The lowbeams would stay on when you went to highbeams.
Do you guys think this would work below?
I see one flaw already. The lowbeams would stay on when you went to highbeams.
Last edited by Franklin2; Dec 27, 2003 at 07:31 PM.
New User
Joined: Jan 2008
Posts: 0
Likes: 24
Thread
Thread Starter
Forum
Replies
Last Post
