Replacing front springs
Thread Starter
|
More Turbo
Joined: Mar 2022
Posts: 585
Likes: 173
Replacing front springs
Is there anything special or hard about replacing the front springs? I have a set of 5600lb springs and a Tremor front sway bar on order from our forum Ford dealer. Is this something I can do in my driveway w/out killing myself and making my wife a rich widow?
Cargo Master
Joined: Feb 2017
Posts: 2,435
Likes: 732
From: Wisconsin
Hard to answer, I don't know your capabilities. I hope this video helps.
https://www.youtube.com/watch?v=WfUY9GeKSvM
https://www.youtube.com/watch?v=8xg-1bIQpVk
https://www.youtube.com/watch?v=WfUY9GeKSvM
https://www.youtube.com/watch?v=8xg-1bIQpVk
Last edited by jimzpsd; Jun 6, 2026 at 04:46 PM.
Hotshot
Joined: Jul 2013
Posts: 14,301
Likes: 2,197
Done it a few times in my driveway.
plenty of YouTube videos on how to do it.
some shock are charged to 200 psi….either try to strap them before removing or buy some nitrogen to re charge them while installed.
if 4wd you might want to disconnect your front drive shaft
plenty of YouTube videos on how to do it.
some shock are charged to 200 psi….either try to strap them before removing or buy some nitrogen to re charge them while installed.
if 4wd you might want to disconnect your front drive shaft
Thread
Thread Starter
Forum
Replies
Last Post
