External Temperature Gauge Burnout
Fleet Mechanic
Joined: Jul 2019
Posts: 1,315
Likes: 312
Maybe, but what usually happens is the solder joint breaks and voila! You are at this point.
https://www.f150online.com/forums/ar...ay-repair.html
https://www.f150online.com/forums/ar...ay-repair.html
Thread Starter
|
Tuned
Joined: Oct 2020
Posts: 332
Likes: 16
Maybe, but what usually happens is the solder joint breaks and voila! You are at this point.
https://www.f150online.com/forums/ar...ay-repair.html
https://www.f150online.com/forums/ar...ay-repair.html
I'm not experienced in soldering ....
How about a part swap instead ?
Is it sold on RA, if so under what section?
Fleet Mechanic
Joined: Jul 2019
Posts: 1,315
Likes: 312
Soldering isn’t a big deal. I think that particular operation in my ‘03 was my first try at it ever. Put the iron on that break and heat it until it spreads over again.
Pull the console and find a local electronics repair guy to do it. Ask a cellphone repair shop.
If you’re asking about where to find the console or display, that’s a salvage yard thing.
Pull the console and find a local electronics repair guy to do it. Ask a cellphone repair shop.
If you’re asking about where to find the console or display, that’s a salvage yard thing.
Thread
Thread Starter
Forum
Replies
Last Post
