POST O Rings replacement
Thread Starter
|
Trailering
Joined: Aug 2015
Posts: 16
Likes: 1
POST O Rings replacement
I had a few O rings on the fuel return that were leaking so I replaced then all, just the rings not the entire hoses or injector covers.....I bled fuel system through the schrader valve on the filter.....the question I have is can I just start it or is there another process for the fuel system I must do prior to cranking it up?
i ain't rite
Joined: Mar 2005
Posts: 65,548
Likes: 5,589
From: Marlboro Mental Hospital.
yup. just a reminder. only crank for 30-45 seconds, then let it sit for around 2 minutes to let the starter cool off.
21.5 compression gets the starter real hot real fast when trying to crank over a fuel starved engine .
21.5 compression gets the starter real hot real fast when trying to crank over a fuel starved engine .
Thread
Thread Starter
Forum
Replies
Last Post
VegasFro
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
1
Aug 19, 2024 10:50 PM
BVA
6.7L Power Stroke Diesel
5
Feb 21, 2019 08:23 PM
