302 build advice
FTE Community Team
Joined: Dec 2023
Posts: 8,941
Likes: 4,311
From: sussex county, nj
so true dave
for that 331 we used out of the box edelbrock 60255 heads , with a 7581 air gap intake cam a edelbrock rollin thunder 2221 , the motor was built more for torque pulled good from 1500 right to 5500, we found it to be a nice out of the box combo,
over all road wise a F5 cobra is a light car, at 2300 pounds , 5 spd trans, 3;55 gears , the 425 hp is way more than is needed to shred the tires
for that 331 we used out of the box edelbrock 60255 heads , with a 7581 air gap intake cam a edelbrock rollin thunder 2221 , the motor was built more for torque pulled good from 1500 right to 5500, we found it to be a nice out of the box combo,
over all road wise a F5 cobra is a light car, at 2300 pounds , 5 spd trans, 3;55 gears , the 425 hp is way more than is needed to shred the tires
Thread
Thread Starter
Forum
Replies
Last Post
FordBoy2012
1973 - 1979 F-100 & Larger F-Series Trucks
15
May 29, 2014 02:43 PM
rchaos70
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
10
Jan 21, 2008 11:04 PM
