Hello everyone,

I'm currently looking for exhaust manifold parts for my 330 that i replaced heads on, does anyone have any part numbers for the exhaust studs as well as the part numbers for the gaskets for the exhaust pipe?

Thank you

 

Head-to-Exhaust-Manifold gasket info
https://www.ford-trucks.com/forums/1...l#post21199151

Double-ended studs info (have to scroll down almost to the end, it's a very long post with a lot of pics)
https://www.ford-trucks.com/forums/1...l#post21269539

 

I have new manifold gaskets, the size for the studs in those threads were nice, thank you.
Is there a gasket between the manifold and the exhaust pipe? Like a doughnut of some sort?

Thank you

 

I installed donuts, yeah, but they don't fit very well and I have a note to myself to look into this again someday. I think the headpipes have been replaced on mine. I got mine to seal, though, but they crushed too much.




I think I tried to cross-ref the 9450 and ran into some issue.
C6TZ-9450-B is what I find, and Bill says:
Exhaust Manifold to Inlet Pipe 'donut' Gasket / 2.75" O.D. x 2.28" O.D. x .58" thick / Obsolete

and later someone said that Felpro 9998 is a replacement. I can't verify any of that.