E 450 no power when key inserted
Thread Starter
|
1st Gear
Joined: Apr 2025
Posts: 1
Likes: 0
E 450 no power when key inserted
Hello
I own a 2007 E 450 super duty 6.8 v 10 It was working fine but I had to jump start to charge the batteries and then I replaced with new batteries and it has no lights / power on dashboard nor any engine sounds.
I have a mechanic friend and he traced the wires, alternator and starter are fine.
fuses also look good.
he thinks it could be the computer we jumpstarted it ( incorrectly) or so mice chewed any cables.
any suggestions to diagnose my issue is greatly appreciated.
I own a 2007 E 450 super duty 6.8 v 10 It was working fine but I had to jump start to charge the batteries and then I replaced with new batteries and it has no lights / power on dashboard nor any engine sounds.
I have a mechanic friend and he traced the wires, alternator and starter are fine.
fuses also look good.
he thinks it could be the computer we jumpstarted it ( incorrectly) or so mice chewed any cables.
any suggestions to diagnose my issue is greatly appreciated.
Last edited by rahmed; Apr 2, 2025 at 10:08 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff Tawater
1983 - 2012 Ranger & B-Series
3
Jan 17, 2018 09:57 AM
