BULLDOG REMOTE START
I have a 2003 F250 that we put a Bulldog remote start in many years ago. It still works well but I have an issue with the parking lights. I start the truck with the remote fob and after a few seconds the parking lights will come on. I am okay with this. But once in awhile when I unlock the door with the key fob and accidently tap the brakes before putting the key in the ignition it will cause the parking lights not to come on when I use the remote start again at a later time. It has done this before and will just one day start working again.
I have one fob for the remote start and a second fob for the door locks...if that information is helpful.
So I know the combination to get the parking lights to not come on when I use the remote start but I can't figure out the combination to get the parking lights to come on again when using the remote start.
I have one fob for the remote start and a second fob for the door locks...if that information is helpful.
So I know the combination to get the parking lights to not come on when I use the remote start but I can't figure out the combination to get the parking lights to come on again when using the remote start.
Thread
Thread Starter
Forum
Replies
Last Post
mdpack
2015 + Expedition & Navigator
2
May 13, 2018 04:22 PM



