HELP CRANK NO START
Thread Starter
|
6th Gear
Joined: Dec 2024
Posts: 6
Likes: 0
HELP CRANK NO START
Hello I have recently replaced all 8 of my injectors and now I have a crank no start did an air leak test through the IPR port heard air coming from the stand pipes and dummy plugs and made sure they were seated properly and pulled the oil cap off to see if I am getting oil to the top side of the motor and it is not reaching pulled the oil rails back off and re seated them just to double check and still same results and it is also not building any oil pressure I am stumped and don’t know what else to test if there are any more suggestions it would be greatly appreciated
Thread
Thread Starter
Forum
Replies
Last Post
