292 With Various Issues
Thread Starter
|
Mountain Pass
Joined: Feb 2017
Posts: 182
Likes: 13
From: Iowa
292 With Various Issues
I got a 61 F600 that I've had for a year or so, and have had it running before, but it ran rough, so I rebuilt the carb, replaced ignition parts, water pump, intake gaskets, exhaust gaskets, thermostat gasket, valve cover gaskets, and adjusted valves. When I first had it going the oil was just old and black, so I changed it. Now I'm trying to set the carb and timing, but can't keep it running under 1100rpm, plus there's coolant getting in the oil. Do I have a blown head gasket now? How do I get the idle to slow down without it dieing?
Cargo Master
Joined: Mar 2002
Posts: 3,132
Likes: 219
From: W (BY GOD) V
When I first had it going the oil was just old and black, so I changed it.
Now I'm trying to set the carb and timing, but can't keep it running under 1100rpm, plus there's coolant getting in the oil. Do I have a blown head gasket now? How do I get the idle to slow down without it dieing?
If coolant is getting into the oil, possible head/intake gasket(s), front timing cover gasket @ water pump.
Thread
Thread Starter
Forum
Replies
Last Post
fluknick
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
16
Jun 10, 2012 11:45 PM
nmarlowe
Ford Inline Six, 200, 250, 4.9L / 300
1
Dec 28, 2003 04:56 PM
Chevy_Monza
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
May 22, 2003 03:09 PM
