Odd no power state
Thread Starter
|
8th Gear
Joined: May 2024
Posts: 8
Likes: 0
Have you opened the wiring loom at the IPR connector? It not uncommon for the wire insulation to turn to jelly from years of heat and oil exposure inside the loom. When the insulation goes the wires can kind of grow together and intermittently short out. Which will kill the engine. Once everything cools back down and shrinks the wires separate and act like nothing happened. I chased that exact problem for months and hundreds of $$.
It's a Van Gogh
Joined: Feb 2010
Posts: 7,802
Likes: 1,331
From: Elk Grove, CA
I'd inspect the IPR harness, open the covering so you can see the wires. To the length of your pigtail. If nothing is obviously wrong I'd wrap it back up before fixing something that ain't broke.
Pics of the wires and connector would help getting second opinions.
Where did you get the new IPR? Some counterfeits out there.
Pics of the wires and connector would help getting second opinions.
Where did you get the new IPR? Some counterfeits out there.
Thread
Thread Starter
Forum
Replies
Last Post
gblaz123
1999 - 2003 7.3L Power Stroke Diesel
17
Nov 10, 2015 05:25 PM
Ryantschump
1999 - 2003 7.3L Power Stroke Diesel
35
Oct 21, 2008 07:32 PM
Steve Straus
1999 - 2003 7.3L Power Stroke Diesel
4
Oct 14, 2007 04:24 PM
dannyboy0917
1999 - 2003 7.3L Power Stroke Diesel
19
Nov 20, 2005 08:18 PM
