Hi,
I had a blowout on the left front a few days ago. The ABS sensor should still be good, but I'm missing the body side harness. The part of the inner fender that holds the sensor plug is missing along with the entire wiring from the body side. I can't see it dangling anywhere.
I am hoping someone can tell me where the wiring originates under the hood, and what path it travels before it goes to the sensor harness. Then I should be able to find along the way and splice into that. I already have a pig-tail for the repair.

Thanks.

 

Found the wires. They go into a larger harness, just by the bulkhead connectors on the driver side.

 

That must have been a spectacular blowout.

 

Yep.
The tread came off. Tire still held air. Eight year old tire, good tread, no cracking.
Good thing I had a change of shorts with me.

​​​​​​​

 

Ouch.

Just be glad nobody was hurt, I guess.