Windshield Washer Spray Nozzles
Thread Starter
|
7th Gear
Joined: Oct 2015
Posts: 7
Likes: 0
Windshield Washer Spray Nozzles
I recently acquired a farmer's 1988 F350 Custom Cab/Chassis with 7.5L EFI engine RWD and I'm at a loss for finding some of the discontinued OEM or after market replacement parts. The previous owner is dead but sometime before he died for some reason he did away with the windshield washer pump, hose and spray nozzle or nozzles. So my question is how many spray nozzles are required, I'm only seeing what I believe to be one hole for the spray nozzle in the cowl vent panel, so is one all there is and did it possibly come with two separate spray nozzles in the one sprayer? I was trying to find the OEM no. on the nozzle but with no luck so far. I just finished replacing the Door Sweeps and Window Channel Seals and finally found some Vent Window Seals to replace next, just wish I had them while working on the other seals. The engine is fairly low mileage (under 98000 miles) for an '88 model and it runs great so far but I haven't had much driving time to find out what MPG I'm going to get but hopefully with the 5 Speed shifter it will soften the blow somewhat. I'm taking baby steps on this restoration so I'm sure I will have more questions before I'm finished...
Hotshot
Joined: Jun 2015
Posts: 12,831
Likes: 2,436
I just replaced all the door seals on my ‘89. Precision has a kit that included the belt molding, glass run, vent window, body opening and the piece that goes on the top of the door.
Yes on the one nozzle with two sprayer holes.
Yes on the one nozzle with two sprayer holes.
Thread
Thread Starter
Forum
Replies
Last Post
cbrown9064
1967 - 1972 F-100 & Larger F-Series Trucks
10
Jan 18, 2022 06:53 PM
SVTDriver97
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
31
Dec 18, 2014 09:16 PM
