Cam Phaser
Thread Starter
|
Cross-Country
Joined: Sep 2018
Posts: 64
Likes: 1
Cam Phaser
I have a cam phaser issue on a 2006 F150 5.4 L. I am thinking of changing to the solid phasers and I am told it will require programming. I have looked on the Forscan site for some info but do not see anything. Does someone out there know if there is something on Forscan that I missed? Thanks for any response.
Fleet Mechanic
Joined: Jul 2019
Posts: 1,316
Likes: 313
FORSCAN doesn’t deal with that. You need to burn a few hundred more bones for a tuner.
In any case, if you’re actually going to do an all out timing job, you’re going to be set if you get all the updated parts. That makes lockouts pointless.
If you’ve gotten to the point that internal wear is bad enough, you’re still wasting money on lockouts. You need a remanned engine at that point.
In any case, if you’re actually going to do an all out timing job, you’re going to be set if you get all the updated parts. That makes lockouts pointless.
If you’ve gotten to the point that internal wear is bad enough, you’re still wasting money on lockouts. You need a remanned engine at that point.
Cargo Master
Joined: Dec 2015
Posts: 2,919
Likes: 512
Thread
Thread Starter
Forum
Replies
Last Post
Phantomtruck68
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
5
May 23, 2021 04:52 PM
