Pivot Arm Suspension Question.
Thread Starter
|
Tuned
Joined: Jan 2022
Posts: 274
Likes: 12
Pivot Arm Suspension Question.
Hello, I have a 94 F150 5.0 extended cab 2 wd. I changed the pivot arm bushing's on my truck, The arm coming from the driver side went really well , but the arm coming from the passenger side wasn't so easy it actually came out and went towards the front of the truck like it was in a bind and after replacing the bushing I had strap it backwards and then jack it up into place. The driver side arm just came straight down and wasn't that hard to get back into place. Is this normal or do I have some other issues my radius arm bushings have also been replaced. Any help greatly appreciated....
Thread
Thread Starter
Forum
Replies
Last Post
geowing
1973 - 1979 F-100 & Larger F-Series Trucks
2
Oct 9, 2004 01:55 AM
