Default Backup Camera
Thread Starter
|
Mountain Pass
Joined: Feb 2016
Posts: 193
Likes: 10
Default Backup Camera
My Brother has a 2020 F-350 Lariat with the multiple backup cameras. His/my question is:
Is there any way to change the Default Backup camera view? When he puts it in reverse it defaults to the tailgate camera, he changes it to the high mount/third brake light camera when hooking up hi fiver. If he pulls forward then back to reverse it changes back to the tailgate camera even if he has the backup camera set to on. Not a real show stopper but kind of frustrating.
Is there any way to change the Default Backup camera view? When he puts it in reverse it defaults to the tailgate camera, he changes it to the high mount/third brake light camera when hooking up hi fiver. If he pulls forward then back to reverse it changes back to the tailgate camera even if he has the backup camera set to on. Not a real show stopper but kind of frustrating.
Trailering
Joined: Dec 2022
Posts: 22
Likes: 6
There is an option you can set to "Turn on rear camera delay". Not sure it works with the bed camera? On the center display, my notes say, Features -> Driver assistant -> Turn on rear camera delay. What this does is to keep the rear camera on a longer while you pull forward so you don't need to pick your camera view again when placed back into reverse. I use this to keep the hitch view camera on while back up/forward to our travel trailer.
Thread
Thread Starter
Forum
Replies
Last Post
Beemdub
2017 - 2022 Super Duty
15
May 11, 2025 05:24 PM
