Plastic Vacuum Tank
Thread Starter
|
Mountain Pass
Joined: Mar 2022
Posts: 142
Likes: 64
From: Wyoming
Plastic Vacuum Tank
Hello, I am replacing the noisy blower motor on my 1994 F250 7.5L and was wondering if the vacuum canister can be moved to give more room? Any help is appreciated.
. Thank You, Paul
. Thank You, Paul
FTE Chapter Leader
Joined: May 2006
Posts: 12,338
Likes: 1,314
From: Central Mississippi
Vac canister can go anywhere. I don't know if you have the traditional Tomato Juice Can, a plastic ball or I think oval box.
They all bolt to the fender liner if you just want to move it for repair.
If you want to relocate it, just make sure the directions are the same.
I use an Escape "pill" style & zip tied it to drier can. I use the real-estate on the fender liner for other stuff.
They all bolt to the fender liner if you just want to move it for repair.
If you want to relocate it, just make sure the directions are the same.
I use an Escape "pill" style & zip tied it to drier can. I use the real-estate on the fender liner for other stuff.
Thread Starter
|
Mountain Pass
Joined: Mar 2022
Posts: 142
Likes: 64
From: Wyoming
Thank you. Will take a closer look to see where it is bolted when I can clear off the snow. Just took a quick look and didn't see. It's going back, just need to make room for pulling out the blower and fan and will put back to stock location.
Thread
Thread Starter
Forum
Replies
Last Post
IDIDieselJohn
1987 - 1996 F150 & Larger F-Series Trucks
9
Nov 30, 2013 07:54 PM
DAT2109
1987 - 1996 F150 & Larger F-Series Trucks
7
Nov 24, 2013 09:35 PM
