trouble code 1280

Reply Subscribe

Thread Tools

Search this Thread

Nov 13, 2003 | 07:34 PM

redpstoke96

Thread Starter

New User

Joined: Aug 2003

Posts: 15

Likes: 0

trouble code 1280

if you arent familiar with the codes i just pulled a 1280 and it says that it means the icp is out of range (low). What part would be failing if this flashes up, i know its the injector control pressure but im not sure about anything else. clear me up if you will

Nov 14, 2003 | 06:47 AM

powerstroker250

Posting Guru

Joined: May 2001

Posts: 1,702

Likes: 0

The ICP is located on the driver's side head near the front.

Nov 14, 2003 | 11:57 PM

lymant

New User

Joined: Oct 2003

Posts: 16

Likes: 0

I'm having a brain fart! what's an ICP?

Nov 15, 2003 | 01:02 AM

cookie88

FTE Leadership Emeritus

Joined: May 2001

Posts: 13,653

Likes: 6

From: Cabot, Arkansas

Quote:

What part would be failing if this flashes up

The most obvious starting point would be the ICP sensor, at the front of the drivers side head. I've also heard that the connector at the ICP can corrode if it's been wet. Might just need to clean the plug up.

Also if you are modified with a chip or a resistor ICP low/high is a common code and dosen't necessarily mean that anything is wrong.