Blower Motor Wiring

Reply Subscribe

Thread Tools

Search this Thread

Sep 5, 2022 | 11:54 PM

8pack

Thread Starter

Fleet Mechanic

Joined: Sep 2018

Posts: 1,537

Likes: 534

Blower Motor Wiring

Below are a couple of pics of my heater blower motor. The wiring is in very poor shape. I have never taken one apart and don’t want to start pulling things apart and find I can’t get them back together.

Can I just replace the wiring? Can I just remove the 2 screws on the back of the motor to get to the wires?

Thanks!

Sep 6, 2022 | 03:20 AM

FortyNiner

Logistics Pro

Joined: Jun 2011

Posts: 4,997

Likes: 422

From: u-rah-rah Wisconsin

Does it work?

Sep 6, 2022 | 05:38 AM

8pack

Thread Starter

Fleet Mechanic

Joined: Sep 2018

Posts: 1,537

Likes: 534

I haven’t tested it with that ugly wiring. There is a electric motor place I can take it to but if it was an easy fix why pay someone else to do to it.

Sep 6, 2022 | 07:20 AM

FortyNiner

Logistics Pro

Joined: Jun 2011

Posts: 4,997

Likes: 422

From: u-rah-rah Wisconsin

The internal wiring is simple enough. Open up the case and take a look.

Sep 6, 2022 | 09:02 AM

EffieTrucker

Phantom of the Phorum

Joined: Jan 2011

Posts: 5,472

Likes: 1,696

From: Kentucky

If you want to test it before pulling it apart, slide a piece of heat-shrink tubing over the ugly wire. Push it all they way into the motor housing.

If that's the ground wire it doesn't really matter if it touches the housing anyway.