Cooling system check
Thread Starter
|
Laughing Gas
Joined: Oct 2009
Posts: 874
Likes: 56
From: Merlin, OR
Cooling system check
I tried searching with a couple of variations for the same question to no avail. I have rented two different cooling system pressure testers, one from Autozone and one from O'Reilly's. Neither of them have the correct size radiator fitting for our trucks. Anyone have one they have used before? I have added coolant to cooling system, but I wanted to add some pressure to system to check for potential leaks before firing up the engine for it's first run. Thanks.
Fleet Mechanic
Joined: Jan 2014
Posts: 1,946
Likes: 118
I would assume they’re designed for the tiny little radiators (and filler necks) that are in the more modern cars. I have a Snap-on unit that has adapters for different neck sizes....however, you’re a long ways from me. Try a radiator shop or older mechanic who services old stuff like ours and see if they’ll let you borrow one.
Laughing Gas
Joined: Jun 2016
Posts: 855
Likes: 56
From: Des Moines, Washington
I have a Stant ST270. It fits the old school radiators and caps. I just used it a couple of hours ago to find a slow drip, it was the hose between the water pump and intake.
it’s still available but at $95 it may not make sense for a one time use.
Michael
it’s still available but at $95 it may not make sense for a one time use.
Michael
Thread
Thread Starter
Forum
Replies
Last Post
