Clutch Problems
Thread Starter
|
New User
Joined: Aug 2003
Posts: 18
Likes: 0
Clutch Problems
I have a 93 F 250 4x4 with a 7.3 power stroke. The clutch piviot that connects to the master cylinder always wears out. The plastic retainer and the metal ball wear. Any ideas on how to fix this. I have replaced the slave and master cylinder and just 3 months ago replaced the clutch but I still have the problem.
Hotshot
Joined: Oct 2003
Posts: 17,799
Likes: 103
From: Ashland City, TN
the piston that pushes into the master might be missaligned.
Check your haynes manual on how to correclty align this with the clutch master, then it shoudln't wear out.
Remember if its slightly off as to going strait in, it can cause a lot of wear after useing clutch.
Check your haynes manual on how to correclty align this with the clutch master, then it shoudln't wear out.
Remember if its slightly off as to going strait in, it can cause a lot of wear after useing clutch.
Thread
Thread Starter
Forum
Replies
Last Post
cavitation
1999 - 2003 7.3L Power Stroke Diesel
22
Jul 14, 2010 12:24 PM
Tony G
Clutch, Transmission, Differential, Axle & Transfer Case
0
Jul 15, 2004 01:35 AM
