E4OD to C6 swap
Thread Starter
|
Cross-Country
Joined: Jul 2007
Posts: 84
Likes: 1
E4OD to C6 swap
Hello. '96 E350 C&C with 460 (335,000 miles) and E4OD with failed torque converter. My plan was to retire this truck. But I unexpectedly lost the lease on my commercial building and need this truck for 4-5 months while I build a new office; probably a total of 3-5,000 add'l miles. It would be 100% in-town driving, so I honestly do not need OD. I don't want to pay the price to over-haul the E4OD. I have access to a fresh C6 that fits a 460. (I do not know from where it started life) I can live with the CEL constantly on. Is this swap doable, and am looking for the protocol to relay to my mechanic shop. Hopefully Mark K. and Randy (rla2005) are still here. Thank you. Kirt
Moderator
Joined: Jun 2003
Posts: 3,550
Likes: 72
From: Calhoun GA
Also, remove the MLPS from the E4OD and keep it plugged into the factory harness in the "N" or "P" position, so you can start the motor (or you can find which pins to jump). Not sure what you would need to do with the shift cable to make it work. I'd say there are other members that will have some info about that.
Good luck with the swap.
Good luck with the swap.
Thread
Thread Starter
Forum
Replies
Last Post
teamtestbot
1968-Present E-Series Van/Cutaway/Chassis
30
Feb 12, 2018 07:03 AM
Spidermanmike
1987 - 1996 F150 & Larger F-Series Trucks
16
Sep 13, 2016 01:54 AM
Rusty75203
Clutch, Transmission, Differential, Axle & Transfer Case
1
Aug 19, 2008 07:28 AM
