When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
In the picture is the clutch release rod at the end of its limits and I still have a good 1-1/2" of free travel on the clutch pedal. It's a new clutch so I was wondering if the clutch pedal lever rod from a 64 F100 (17.25" long) would work in place of the current rod (18" rod). It would give me a little additional rotation on the Z-bar thus making the crayon screw into the release rod more. I'm open to other ideas, I just wanna get this back on the road.
