Edge 3"
Thread Starter
|
Elder User
Joined: Aug 2003
Posts: 519
Likes: 0
From: New York
Edge 3"
my question is about the EDGE 3'' leveling suspension. i own a '03 FX4 F250SD SC Long Bed with the snow plow package and the truck sits level right now as is. would this new suspension just make me noise high or will it lift the whole truck up an added 3'' front to back?? and if that is the case, i could prob run 35'' no prob right? would i need a larger block for the rear to make it level again if it did make me noise high? just curious let me know. thanks for the help guys.
-bigdawg
-bigdawg
Post Fiend
Joined: Dec 2002
Posts: 6,245
Likes: 1
From: IL, USA
The Edge 3" is a hanger and shackle for the front springs. You would have to adjust the rear height to get the desired look that you want. A bigger block (most likely 5-5.5" range) in place of your stock F-250 block would be needed.
Since you have the 5.4 with the plow package I'd say you'd be able to fit 35" tires with the 3" Edge.
Hope this helps.
Since you have the 5.4 with the plow package I'd say you'd be able to fit 35" tires with the 3" Edge.
Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
