Cruise Control
Thread Starter
|
Tuned
Joined: Sep 2005
Posts: 437
Likes: 4
From: SE Missouri
Cruise Control
I have 1990 F-250 7.5 no cruise control...have a chance to get everything i need from a 1995 F-250 7.5...question is will the year difference matter and if not what all do I need to grab, I do already have a cruise steering column I got it just to have tilt wheel...appreciate any help
Fleet Owner
Joined: Aug 2005
Posts: 23,667
Likes: 301
From: Easton,Ks
The speed control SERVO/AMPLIFIER module.
And all of the connectors between the column and SERVO/AMPLIFIER module.
Note you will be taking the speed information off transmission VSS for pin #3 of the SERVO/AMPLIFIER module.
Also a ground at pin #10.
Attachment 278801
/
And all of the connectors between the column and SERVO/AMPLIFIER module.
Note you will be taking the speed information off transmission VSS for pin #3 of the SERVO/AMPLIFIER module.
Also a ground at pin #10.
Attachment 278801
/
Fleet Owner
Joined: May 2009
Posts: 21,437
Likes: 76
From: Gilbert, PA
I have 1990 F-250 7.5 no cruise control...have a chance to get everything i need from a 1995 F-250 7.5...question is will the year difference matter and if not what all do I need to grab, I do already have a cruise steering column I got it just to have tilt wheel...appreciate any help
not to say it is the same procedure but this is what I did on my 96 bronco
cruise horn pad installed, cruise servo/cable installed, plug at master cylinder jumped
And that gave me working cruise control
Thread
Thread Starter
Forum
Replies
Last Post
Elbowgrease2021
1973 - 1979 F-100 & Larger F-Series Trucks
2
Sep 18, 2021 09:26 AM
