Cruise O Matic - problem
Thread Starter
|
New User
Joined: Feb 2021
Posts: 5
Likes: 0
Cruise O Matic - problem
hello gentlemen.
I have a cruise o matic gearbox rebuilt. The converter was also rebuilt. The oil is Dexron III Elf. The problem is that in the P and R positions, the engine loses its revolutions, there is no force to turn even after pressing the gas pedal. The car does not have a drive shaft installed.
I am asking for good advice or help.Best regards.
I have a cruise o matic gearbox rebuilt. The converter was also rebuilt. The oil is Dexron III Elf. The problem is that in the P and R positions, the engine loses its revolutions, there is no force to turn even after pressing the gas pedal. The car does not have a drive shaft installed.
I am asking for good advice or help.Best regards.
Thread
Thread Starter
Forum
Replies
Last Post
midsouth
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
Oct 9, 2011 08:55 AM
brownsock
1983 - 2012 Ranger & B-Series
2
Jan 14, 2004 10:56 PM
