E4OD flush

Reply Subscribe

Thread Tools

Search this Thread

Jul 19, 2021 | 11:28 PM

#16

AuroraGirl

Lead Driver

Joined: Jun 2021

Posts: 5,221

Likes: 805

Quote:

Originally Posted by GreenMountain95

Hey everybody got the trans all flushed. Made a fatal rookie mistake and would really appreciate your advice on a hopefully easy fix . I unscrewed the incorrect nut when taking off the trans return line, and broke the line. It is about an inch and a half shorter now and looks like I could pull it over and it would still work, but without the belled end in the threaded in peice the trans line would pop right out I think.

Is there an easy fix for this ? Like a repair coupling etc. I don't know much about what you can do with metal lines. Or do I need new trans return line?

I believe the help section in auto stores has the flared fitting you desire on a short straight piece so you could install and put a small section of hose between and if it’s short you just need clamps and wouldn’t need flares but a simple flats is not a bad idea to help lock any hose down.