Any CTS3 users out there?
Thread Starter
|
Fleet Mechanic
Joined: May 2006
Posts: 1,376
Likes: 12
From: Illinois
FWIW I have an update....
I was still not ready to give up on the CTS 3.
I have solved the decimal point issue!!!
If you click on the pid on the gauges screen it will give you and option to change that pid to something else or keep it.
Once on that screen you will see above a symbol of a wrench and a hammer crossed,Click on that and it will say "Precision count" + or + 1-3....If you hit + it low and beholds the addition of a decimal point!!!!!
So Mine was reading for ex soot GPL 7 and thats all.Now after I hit the "+" it adds the decimal point and now reads 7.38.
For now I will be returning my BAFX OBD 2 readed and tablet and will keep the CTS 3 in hopes of many years of good life out of it.
Thanks to all who helped me out!
I was still not ready to give up on the CTS 3.
I have solved the decimal point issue!!!
If you click on the pid on the gauges screen it will give you and option to change that pid to something else or keep it.
Once on that screen you will see above a symbol of a wrench and a hammer crossed,Click on that and it will say "Precision count" + or + 1-3....If you hit + it low and beholds the addition of a decimal point!!!!!
So Mine was reading for ex soot GPL 7 and thats all.Now after I hit the "+" it adds the decimal point and now reads 7.38.
For now I will be returning my BAFX OBD 2 readed and tablet and will keep the CTS 3 in hopes of many years of good life out of it.
Thanks to all who helped me out!
Thread
Thread Starter
Forum
Replies
Last Post
