When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am looking for a little advice on the location of the High Pressure Power Steering line from the Pump to the Control Valve. It is mostly a 74 F250 HighBoy. The truck came to me with many home made parts so the original hoses and routing was no where near what it should be. I am basically trying to fit standard parts back on to a Frankenstein. The picture below shows my question. Does the stock hose go on the right or left side of the steering shaft. Thanks!
